APPLICATION
These cables use for electric heating fed at line voltage in protected areas, auxiliary circuits at line voltage and traction circuits.
CONDUCTOR: Tinned annealed stranded copper wires Class 5 acc. to IEC / EN 60228
FIRE BARRIER: Mica tape over the conductor
INSULATION: Halogen free, heat resistant, cross linked compound, Type EI 109 acc. to EN 50264-1
INNER COVERING: Seperating foil
SCREEN: Tinned copper wire braiding
OUTER SHEATH: Halogen free, heat resistant, cross linked compound, Type EM 104 acc. to EN 50264-1
STANDARD: Based on EN 50264-3-1
GUIDE TO USE: EN 50355, EN 50343
GENERAL REQUIREMENTS: EN 50264 1
FLAME PROPAGATION SINGLE CORE: EN 60332-1-2
FLAME PROPAGATION BUNCHED CABLE: EN 60332-3-24
SMOKE DENSITY: EN 61034-2
TOXICITY OF GASES: EN 50305
HALOGEN FREE: EN 60754-1, EN 60754-2, EN 60684-2
CORROSIVITY OF GASES: EN 60754-2
MINERAL OIL, ACID, ALKALI RESISTANT: EN 60811-404
OZONE RESISTANT: EN 50305
NO FLUORINE: EN 60684-2
FIRE PROTECTION ON RAILWAY VEHICLES: EN 45545
CIRCUIT INTEGRITY: EN 50200
CONDUCTOR RESISTANCE: EN 60228, IEC 60228
UV RESISTANT: BS EN 50289-4-17 Method B
RATED VOLTAGE: 1,8/3 kV
TEST VOLTAGE: 6,5 kV
MAX. CONDUCTOR TEMPERATURE: 90°C
MIN. AMBIENT TEMPERATURE: -40°C
SHORT CIRCUIT TEMPERATURE: 200°C (Max. 5 s)
THERMAL ENDURANCE TEMP.: 110°C (20 000 h)
MIN. BENDING RADIUS: EN 50355 Tab.16
ALL INSTALLATIONS D≤12 MM: 10xD mm
ALL INSTALLATIONS D>12 MM: 10xD mm
