RigFlex-125 Type P Signal Cable Individually Shielded Unarmoured

CONDUCTOR : Soft annealed flexible stranded tinned copper wire acc. to IEEE 1580 Table 11
SEPERATOR : A suitable separator tape may be applied to the conductor (optional for manufacturer)
INSULATION : Cross-linked polyolefin compound, in accordance with Type P of IEEE 1580 and Type X110 of UL 1309/CSA C22.2 No.245.
INDIVIDUALLY SHIELD : An aluminium/polyester tape with drain wire, 100% coverage, is applied over each twisted pair and the cabled core
SHEATH : Thermoset chlorinated polyethylene, CPE compound, in accordance with IEEE 1580 and UL 1309/CSA C22.2 No.245

REFERENCE STANDARDS : IEEE 1580, UL 1309, CSA C22.2 No.245, IEEE 45
INSULATION MATERIAL : IEEE 1580, UL 1309, CSA C22.2 No.245
SHEATH MATERIAL : IEEE 1580, UL 1309, CSA C22.2 No.245
CONDUCTOR MATERIAL : ASTM B 33
CONDUCTOR RESISTANCE : IEEE 1580 Table 11
FLAME PROPAGATION : IEEE 1202, IEC 60332-3
COLD BEND (-40) : CSA C22.2
COLD IMPACT (-35) : CSA C22.2
TEMPERATURE RATING IEEE 1580 : 100°C (Single Core 125°C)
TEMPERATURE RATING UL 1309 : 110°C (Single Core 125°C)

RATED VOLTAGE : 600/1000 V
TEST VOLTAGE : IEEE 1580 Table 19
MIN. BENDING RADIUS
For D≤25 mm : 4 x D
For D>25 mm : 6 x D
CURRENT CARRYING CAPACITY : IEEE 45.8